Monday, March 15, 2010

New Mahindra & Mahindra Plant Inaugurated At Chakan

NEW DELHI, March 13, 2010: Mahindra Chakan, a 700 acre, future-ready facility set up by automaker Mahindra and Mahindra Ltd (M&M) at Chakan, was inaugurated this Saturday by the Maharashtra Chief Minister, Mr Ashok Chavan.
Initially, the plant will have an annual installed capacity of 300,000 units, including 50,000 trucks. This will enable M&M to manufacture its entire range of products ranging from the 0.75-tonne Maxximo to the 49-tonne Mahindra Navistar truck, as also its sports utility vehicle (SUV) range it plans to launch in the U.S. The plant will initially make the full range of medium and heavy commercial vehicles from the joint venture with Navistar ranging from 25-49 tonne tippers and trucks. It will also accommodate production of other models if required by the future market demand. “We will manufacture all new products here, including the range that will be exported to the US,” Dr. Pawan Goenka, President, Automotive Sector, M&M said.
 Rs. 5,000 Cr. will be invested in the first phase of the plant, making this the largest single investment in the Indian auto sector. According to Dr. Goenka, half of this has already been made, while the other half will be invested over the next 18 months.
Built as a green facility, the plant will tap alternate energy sources such as solar energy and waste heat for use in factory operations. This will reduce the consumption of LPG and electricity in the paint shop, in addition to lowering carbon dioxide emissions by 3,500 tonnes at full volume. Upon completion, Mahindra Chakan will be amongst the most eco-friendly auto plants in the world.
M&M Chakan will house paint shops, press shops and body shops, as also an engine plant with an installed capacity of 1,20,000 engines for utility vehicles and 40,000 engines for trucks. The facility employs around 1,400 people at present. At full capacity, the plant will provide 5,000 direct jobs and five times as many indirect jobs.

Courtesy: The Hindu


  1. i would like to work with mahindra navister. i am working in HYUNDAI MOTOR INDIA.

    P.Ashok kumar

  2. hi,
    i am mechanical engg, working in lumax autoparts. i am very keen to works with mahindra

  3. Hii

    I am Meghant jain currently working (as a senior excutive sales) with MAN-Force Trucks.I am very keen to work with mahindra group.
    Meghant jain

  4. Hi,

    Am a Green Architect doing LEED projects. Would like to get involved with your new upcoming projects which require Green facilitation.


  5. Hi...
    This is Rafiya Inamdar Want to join Mahindra & Mahindra Family Chakan Plant.


  6. Hi.....
    this is Suresh babu kolusu.
    right now i am working with behr india ltd(anand group)
    i want to join with mahindra&mahindra chakan plat

  7. Hi
    I am Anil Bhosale working as Excise & Dispatch Officer in Pune Pvt. Ltd .Co. I like to join with your Chakan Plant

  8. I am mahesh Hirkar ,want to join the mahindra nevistar .Am currently working as a customer support executive in automobile company .

    Mahesh Hirkar
    Cell no 9329562868

  9. Dear Sir,

    I am PRSHANT JOSHI, i am DME with 1 year,3 month Experience in Vendor Development Dept. i am current working in P.M. Diesels Pvt. Ltd. with coloration M & M Ltd.Rajkot.
    So. i like to join your new Plant Chakan (Pune) plant.

    Thanks & Regards,

    Prashant Joshi
    Jr. Engineer (Vendor Development)
    For P. M. Diesels Pvt. Ltd.
    Rajkot. (Gujarat)

  10. Dear Sir,

    I am presently working with MAN FORCE TRUCKS Dealer as a works manager having 14 years experience of automobile service in Andhra Pradesh.

    So I would like to join in Mahindra navistar Family.
    Thanks & Regrds

    S.Chandra Sekhara Sarma
    98850 95290
    E- Mail

  11. Dear Sir,

    I am presently working with sETCO AUTOMOTIVE LTD, Gujarath as A service engineer having 7 years experience of automobile service in.

    So I would like to join in Mahindra navistar Family.
    Thanks & Regrds

    E- Mail

  12. Hi
    I am Manjusha Bhoskar working with TPF Group as HR & Admin Executive in Pune. I like to join with your Chakan Plant.,

  13. Dear sir/madam,

    I am Gitesh Apte.I would like to work in organisation. I wish to submit my candidature for the same as per details.

    I am aged 24 Years and possess a ITI Degree in Diesel Mechanic which I obtained in the Year 2006.

    Thereafter, I have completed apprenticeship in Pandit Automotive and have experience of 3 yrs in Chowghule Industries

    Gitesh Apte

  14. Dear sir,
    I completed my B.E. in Electronics and Telecommunication from
    Pune University, hands on C programming and accented with the latest
    trends and techniques of the field.Certified Embedded system and
    design technology Conceptually strong with an innovative & analytical
    approach to work with an eye for detail. Ability to learn new concepts
    & technology within a short time span. Extensive hands on 8, 16 and
    32 bit microcontroller, low level device driver. Good communication.

  15. Hi,
    I am Vikram singh currently working in Ashok Leyland dealer in M.P. as branch head which one operated in 7 districts.
    I am looking whole sales,with 10+ years experience in Commercial automobile sector.
    I wish to submit my candidature for the same as per details.

    Vikram Singh


  16. Dear Sir,

    I am presently working with Honeywell Turbo, Pune as A Sr Executive having 5 years experience of Indirect Purchase.

    So I would like to join in Mahindra navistar Family.
    Thanks & Regrds

    Prashant Shendge
    E- Mail -

  17. Dear sir/madam,

    I am Sunil Beldar .I would like to work in organization. I wish to submit my candidature for the same as per details.

    I am aged 24 Years and possess a ITI Degree in Motor Mechanic which I obtained in the Year 2004.

    Thereafter, I have completed apprenticeship in Mahindra & Mahindra Nashik Plant and have experience of 3 yrs in Neelay Industries nashik .

    Best Regards,
    Sunil Beldar

  18. Dear Sir/Madam,

    ENGINEER, I have work Experience as a Customer Support Engineer in BEHR INDIA
    PVT LTD .

    I have enclosed my resume for possible employment with your
    organization.Please see the attached resume for my Work experience.If any
    job suits jobs to my profile Please Post a mail to me.I will be available
    for the interview any time as per your convenience.

    Kindly consider my candidature for recruitment in your firm.

    Thank you and Regards,


  19. Dear Sir,

    I am PRASHANT PATIL, i am BE(Mechanical) with 1 year Experience in Production Dept. i am current working with Kinetic Engineering Ltd.So i like to join your new Plant Chakan (Pune) plant.

    Thanks & Regards,

    Prashant Patil
    Jr. Engineer (Production)
    From Kinetic Engineering Ltd.,Ahmednagar

  20. I am MADHUKAR DEONE, i am ITI fitter+ diploma (mechanical) with 13 year Experience in production dept.i am current woking with Acrysil steel pvt ltd. As a Press supervisor.So i like to jion your new plant chakan(pune).

    Thanks & Regards


  21. I am Vishnu Sarode .I would like to work in organization. I wish to submit my candidature for the same as per details.

    I am aged 24 Years and possess a ITI in Computer Opretor which I obtained in the Year 2007.

    Thereafter, I have completed Graduation in B.Com in Amarvati University and have experience of 3 yrs in Mahindra Hinoday Indu. Ltd, Bhosari, pune .

    Best Regards,
    Vishnu Sarode

  22. To,
    respected sir,
    i am VINIT N. SURYAWANSHI compliting B.TECH (production engineering)from COLLEFGE OF ENGINEERING,PUNE.
    I would like to join MAHINDRA & MAHINDRA family chakan plant as TRANIEE ENGINEER for my next acadmic semister 2012-13.
    so,please consider my candidature for recruitment in your organization.

    thanks and regards


    Respected sir,
    I am G.vijaya bhakar now I am working in MAHINDRA NAVISTER AT DEALER POINT As a Works manager. so I would like to work at MAHINDRA NAVISTER AT CHAKAN PLANT. I have 8 years experience in M@M.

    CELL NO :-9963291631.

  24. i like to work with mahindra chakan plant I have 9 yrs exp in purchase
    EDUCATIONAL BACK GROUND : b. btech mechanical
    Thanks & Regards
    MOB NO : 9767637077

  25. Respected Sir,
    I,T.Abhishek completed my B-Tech in mechanical engineering in G.V.P college of engineering,visakhapatnam with an aggregate of 75.5 and interested in working in your company.So plz consider it.
    Thanks & Regards,
    mob no:9494655255
    email id:

  26. I am Akhilesh Mishra completed my B-Tech in Automobile engineering from M.C.K.V Institute of technology(West Bengal University), interested to work on your company.
    thank you,

  27. Dear Sir,
    We are one of the renowned manufacturer of Multipoint Solid Carbide and Carbide Tipped Tools, Reamers, Hole Mill, End mills and Step Drill.

    We also deals in Z Axis Zero Setter & Dial Gauge Stand.

    We also keeps in stock of all standard Chucking, Machine reamers and also carry out job work, grinding and sharpening of reamers & cutters.

    Thanking you once again and assuring you of our best services at all times.



    Ravindra A. Balwadkar
    Anand Tools Manufacturer
    Gala no.29, Moraya Industrial Complex,
    T201/1 MIDC, Bhosari, Pune 411026.
    Cont. no. +91 9922738275, +91 9881090642
    E-mail ID:

  28. This comment has been removed by the author.

  29. We absorb all plants Seaweed arrangement in our nursery before sending to decrease transport pressure.

  30. Do you need an urgent loan of any kind? Loans to liquidate debts or need to loan to improve your business have you been rejected by any other banks and financial institutions? Do you need a loan or a mortgage? This is the place to look, we are here to solve all your financial problems. We borrow money for the public. Need financial help with a bad credit in need of money. To pay for a commercial investment at a reasonable rate of 3%, let me use this method to inform you that we are providing reliable and helpful assistance and we will be ready to lend you. Contact us today by email: Call/Text: +1(501)800-0690 And whatsapp: +1 (501) 214‑1395

    Ask Me.

  31. I am so delighted I found your weblog, I really found you by accident,
    while I was researching on Bing for something else, Regardless I am here now and would just I saw this FAKE UK DRIVING LICENCE THAT WORKS FROM THE DVLA an will like to say thank you. (I also love the theme/design), I don’t have time to go through it all at the minute but I have bookmarked it and also added your RSS feeds, so when I have time I will be back to read a lot more, Please do keep up the excellent job.

  32. Positive site, where did u come up with the information on this posting?I have read a few of the articles on your website now, and I really like your style. Thanks a million and please keep up the effective work. truck dispatcher training

  33. Howdy! I could have sworn I’ve been to this site before but after browsing through some of the post I realized it’s new to me. I also fell on this
    ONE OF THE EASIEST WAY TO ACQUIRE REAL PASSPORTS ONLINE IN LESS THAN NO TIME Anyways, I’m definitely happy I found it and I’ll be bookmarking and
    checking back frequently!

  34. This comment has been removed by the author.